Brother MFC-8880DN - CCD Module; Lock Lever B; Lock Lever ASSY

5-134
Confidential
9.10.3 Lock Lever B / Lock Lever ASSY
(1) Remove the B M3x6 Taptite screw, and then remove the Lock lever B.
(2) Remove the two B M3x6 Taptite screws, and then remove the Lock lever ASSY.
Fig. 5-151
9.10.4 CCD Module
(1) Push the Pulley ASSY to the direction of the arrow 1a and remove the Belt.
Fig. 5-152
Assembling Note:
• After moving the Lock lever ASSY to "A" direction, assemble "B" of the Lock lever B
that is to the direction of the top cover rib in touch.
Taptite B M3x6
Taptite B M3x6
Lock lever ASSY
Lock lever ASSY
Lock lever B
Lock lever B
"A"
"B"
Belt
1a
1b
Pulley ASSY