Brother MFC-8880DN - Page 626

App. 1-49
Confidential
<WSW50> (SDAA settings)
<WSW51> (Function setting 17)
Selector No. Function Setting and Specifications
1
2
Percentage voltage for
interpreting the external
telephone as being hooked up
(based on the network's
standard voltage)
(Not used.)
3
DC mask curve table to be
applied when the line is
connected
(Not used.)
4
AC impedance to be applied
when the line is connected
(Not used.)
5
6
Current control to be applied
immediately after connection of
the line
(Not used.)
7
8
AC voltage threshold for
detection of ring
(Not used.)
Selector No. Function Setting and Specifications
1
Output of communications error
report when transmission
verification report is disabled
0: Enable 1: Disable
2
CR motor torque variation
reduction control (Not used.)
3
4
Cordless handset microphone
volume
(Not used.)
5
I
7
Main unit microphone level and
echo cancellation ON/OFF
function (Not used.)
8
Support between nearly empty
→ empty when main unit cover
opened after nearly empty
detected (Not used.)