Brother MFC-890 - Automatic and Manual Fax Redial; Pause

AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 7
1
Place the document face up in the ADF, or face down on the
scanner glass.
2
Enter a number using Speed Dial, a Group number, Search or
the dial pad.
(Example: Group number)
3
Press
Menu/Set
if you use Search, press
Menu/Set
again
after selecting the number (or name). You will be asked to press
the next number.
4
Enter the next number.
(Example: Speed Dial number)
5
Press
Menu/Set
.
6
Enter another fax number.
(Example: Manual dialing using the dial pad.)
7
Press
Fax Start
.
Your machine will read the document into the memory and then
start sending faxes to the numbers you entered.
Pause
Press
Redial/Pause
to insert a 3.5-second pause between
numbers. If you are dialing overseas, you can press
Redial/Pause
as many times as needed to increase the length of the pause.
Automatic and manual fax redial
Automatic Fax Redial: If you are sending a fax automatically and the
line is busy, the machine will automatically redial up to 3 times at 5
minutes intervals.
Manual Fax Redial: Place the document to be re-sent and press
Redial/Pause
and then
Fax Start
to make a second call to the last
number dialled.