1 - 2 INTRODUCTION
MFC-890 control panel overview
1
ON/OFF
You can turn the machine on
or off.
2 Fax and telephone keys:
Redial/Pause
Redials the last number you
called. It also inserts a pause
in auto dial numbers.
Receive Mode
Use to select how the
machine will handle
incoming calls.
Dial Pad
Use to dial telephone and fax
numbers and as a keyboard
for entering information into
the machine.
The
#
key lets you switch the
dialing type during a
telephone call from Tone to
Pulse.
Search/Speed Dial
Lets you look up numbers
that are stored in the dialing
memory. It also lets you dial
stored numbers by pressing
#
and a two-digit number.
Fax Resolution
Sets the resolution when you
send a fax.
Fax Start
Starts an operation, such as
sending a fax.
Tel/R
This key is used to have a
telephone conversation
having picked up the external
handset in F/T
pseudo-ringing etc. Also, use
this key to gain access to an
outside line and/or to recall
the operator or transfer a call
to another extension when it
is connected to a PABX.
31
9
425
0 876
To Next Page
Loading...
Need help?
General
