6 - 7 SETUP SEND
Fax resolution
When you have an document in the ADF or on the scanner glass you
can use the
Fax Resolution
key to change the setting temporarily
(for this fax only). Press
Fax Resolution
repeatedly until the LCD
shows the setting you want.
—OR—
You can change the default setting.
1
Press
Menu/Set
,
2
,
2
,
2
.
2
Press or to select the
resolution you want.
Press
Menu/Set
.
3
Press
Stop/Exit
.
STANDARD Suitable for most typed documents.
FINE Good for small print and transmits a little slower
than STANDARD resolution.
S.FINE Good for small print or artwork and transmits
slower than FINE resolution.
PHOTO Use when the document has varying shades of
grey. This has the slowest transmission time.
COLOUR STD Use to send the document in colour.
COLOUR FINE Better quality than COLOUR STD. Use to send
the document as Art-work or photographs in
colour.
SETUP SEND
2.FAX RESOLUTION
To Next Page
Loading...
