9 - 1 PRINTING REPORTS
9
Machine settings and activity
You need to set up the Transmission Verification Report and Activity
Report Interval in the menu table.
Press
Menu/Set
,
2
,
4
,
1
.
—OR—
Press
Menu/Set
,
2
,
4
,
2
.
Customizing the Transmission Verification
Report
You can use the Transmission Report as proof that you sent a fax.
This report lists the time and date of transmission and whether the
transmission was successful (OK). If you select ON or ON+IMAGE, the
report will print for every fax you send.
If you send a lot of faxes to the same place, you may need more than
the job numbers to know which faxes you must send again.
Selecting OFF+IMAGE will print a section of the fax's first page on the
report to help you remember.
1
Press
Menu/Set
,
2
,
4
,
1
.
2
Press or to select OFF,
OFF+IMAGE, ON or ON+IMAGE.
Press
Menu/Set
.
3
Press
Stop/Exit
.
Printing Reports
When the feature is OFF, the Report will only print it there is a
transmission error. (NG).
REPORT SETTING
1.XMIT REPORT
REPORT SETTING
2.JOURNAL PERIOD
REPORT SETTING
1.XMIT REPORT
To Next Page
Loading...
