Brother MFC-890 - Initial Setup; Getting Started; Setting the Paper Type

INITIAL SETUP 4 - 1
4
Getting started
Setting the Paper Type
Set the machine for the type of paper you are using.
1
Press
Menu/Set
,
1
,
1
.
2
Press or to select PLAIN,
INK JET, GLOSSY or
TRANSPARENCY.
Press
Menu/Set
.
3
If you selected GLOSSY, press or to select
GLOSSY:4-COLOUR or GLOSSY:3-COLOUR.
Press
Menu/Set
.
4
Press
Stop/Exit
.
Initial setup
The print quality of black ink varies depending on the kind of
glossy paper you are using. Black ink is used when you select
GLOSSY:4-COLOUR. If the glossy paper you are using repels
the black ink, select GLOSSY:3-COLOUR, which simulates black
ink by combining the three ink colours.
The machine ejects paper with printed surfaces face up onto the
paper tray in the front of the machine. When you use
transparencies, remove each sheet immediately to prevent
smudging or paper jams.
GENERAL SETUP
1.PAPER TYPE