5 - 17 SETUP RECEIVE
Switching OFF TX Lock
1
When TX Lock is switched ON,
press
Menu/Set
.
2
Enter a 4-digit password and press
Menu/Set
.
The screen displays ACCEPTED, then after 2 seconds the
display reverts to normal. TX Lock is now switched OFF.
If you forget the TX Lock password, please contact your Brother
dealer or Brother for assistance.
If the password you enter at Step 2 is incorrect, the screen
would display WRONG PASSWORD. After 2 seconds the display
will then return to displaying TX LOCK MODE. You must then
start from Step 1 to switch OFF TX Lock.
TX LOCK
PASSWORD:XXXX
To Next Page
Loading...
