Brother MFC-890 - Changing Your Remote Access Code

REMOTE FAX OPTIONS 8 - 3
Changing your remote access code
Enter your Remote Access Code when the machine picks up your
call, so you can access features while you are away from your
machine. The access code is preset to 1 5 9 , but you can change
it.
1
Press
Menu/Set
,
2
,
5
,
3
.
2
Enter a three-digit number from 000
to 998.
Press
Menu/Set
. (The " " cannot be changed).
3
Press
Stop/Exit
.
Do not use the same digits that appear in your Fax Receive
Code or Telephone Answer Code. (See Operation from
extension telephones on page 5-6.)
REMOTE FAX OPT
3.REMOTE ACCESS