EasyManua.ls Logo

Brother MFC-890 - Faxing from the Automatic Document Feeder (ADF); Recommended Environment

Brother MFC-890
334 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SETUP SEND 6 - 2
Faxing from the automatic document feeder (ADF)
The ADF can hold up to 30 pages and feeds each sheet individually.
Use standard (75 g/m
2
) paper and always fan the pages before
putting them in the ADF.
Recommended environment
Make sure documents written with ink are completely dry.
Documents to be faxed must be from 14.7 to 21.6 cm wide and
14.7 to 35.6 cm long.
1
Unfold the ADF Document Support.
2
Unfold the ADF Document Output Support Extension.
Temperature: 20° C - 30° C
Humidity: 50% - 70%
DO NOT use paper that is curled, wrinkled, folded, ripped,
stapled, paper clipped, pasted or taped.
DO NOT use cardboard, newspaper or fabric. (See Faxing from
the scanner glass on page 6-4.)
ADF Document
Support
ADF Document Output
Support Extension

Table of Contents

Other manuals for Brother MFC-890

Related product manuals