USING YOUR MACHINE WITH A MACINTOSH
®
19 - 20
Adjusting the Image
Brightness
Adjust the Brightness setting to get the best image. The Brother
TWAIN Scanner driver offers 100 Brightness levels (-50 to 50). The
default value is 0, representing an ‘average’ setting.
You can set the Brightness level by dragging the slidebar to the right
to lighten the image or to the left to darken the image. You can also
type a value in the box to set the level. Click OK.
If the scanned image is too light, set a lower Brightness level and
scan the image again.
If the image is too dark, set a higher Brightness level and scan the
image again.
Contrast
You can only adjust the Contrast level when you have selected one
of the Grey Scale settings, it is not available when you have selected
Black & White is selected as the Colour Type.
Increasing the Contrast level (by dragging the slidebar to the right)
emphasizes dark and light areas of the image, while reducing the
Contrast level (by dragging the slidebar to the left) reveals more
detail in the grey areas. Instead of using the slidebar, you can type a
value in the box to set the Contrast. Click OK.
To Next Page
Loading...
Need help?
General
