Brother MFC-890 - Using more than One Temporary Copy Setting

MAKING COPIES 10 - 5
Using more than one temporary copy
setting
When you want to change the settings only for the next copy, use the
Enlarge/Reduce
,
Quality
and
Options
keys.
You can use different combinations. For example, if you want to copy
a photograph on glossy paper with best print quality, press the
Quality
key to select
Best
and then press the
Options
key to
select GLOSSY in the PAPER TYPE setting.
■ Improve Quality (See Using the Quality key on page 10-6.)
■ Enlarge and Reduce (See Using the Enlarge/Reduce key on
page 10-7.)
■ Paper Type (See Paper Type on page 10-10.)
■ Near Edge Copy (See Near Edge on page 10-11.)
■ Brightness (See Brightness on page 10-11.)
■ Contrast (See Contrast on page 10-12.)
■ Sort Copies (See Sorting copies using the ADF on page 10-13.)
■ Page Layout (See Page Layout using the ADF on page 10-13
and Page Layout using the scanner glass on page 10-14.)
■ Manual Feed Copy (See Turning on Manual Feed on page
10-15.)
Copy Keys