HOW TO SCAN USING WINDOWS
®
15 - 5
4
Select the portion you want to scan by clicking the left mouse
button and dragging it.
5
Place the document face up in the ADF again, if you used the
ADF in step 1.
6
Click Start.
This time only the selected area of the document will appear in
the PaperPort
®
window (or your software application window).
7
In the PaperPort
®
window, use the options available to refine the
image.
You can enlarge the portion you selected by pressing to
check it. If you want to select the different portion, use to
undo the image.
To Next Page
Loading...
