Brother MFC-9125CN - Page 468

7-10
Confidential
WSW29 Function setting 7 App. 1-29
WSW30 Function setting 8 App. 1-29
WSW31 Function setting 9 App. 1-30
WSW32 Function setting 10 App. 1-30
WSW33 Function setting 11 App. 1-31
WSW34 Function setting 12 App. 1-31
WSW35 Function setting 13 App. 1-31
WSW36 Function setting 14 App. 1-32
WSW37 Function setting 15 App. 1-33
WSW38 V.34 transmission settings App. 1-34
WSW39 V.34 transmission speed App. 1-35
WSW40 V.34 modem settings App. 1-36
WSW41 ON-duration of the scanning light source App. 1-37
WSW42 Internet mail settings App. 1-37
WSW43 Function setting 21 App. 1-38
WSW44 Speeding up scanning-1 App. 1-38
WSW45 Speeding up scanning-2 App. 1-39
WSW46
Monitor of power ON/OFF state and parallel port kept at high App. 1-40
WSW47 Switching between high- and full-speed USB App. 1-41
WSW48 USB setup latency App. 1-41
WSW49 End-of-copying beep and print in black App. 1-42
WSW50 SDAA settings App. 1-42
WSW51 Function setting 16 App. 1-43
WSW52 Function setting 17 App. 1-43
WSW53 Function setting 18 App. 1-43
WSW54 Function setting 19 App. 1-44
WSW55
Interval of time requred for the developing bias voltage correction App. 1-45
WSW56 Function setting 21 App. 1-45
WSW57 Function setting 22 App. 1-46
WSW58 Function setting 23 App. 1-46
WSW59 Function setting 24 App. 1-47
WSW60 Function setting 25 App. 1-48
WSW61 Scanning light intensity to judge to be stable 1 App. 1-49
WSW62 Scanning light intensity to judge to be stable 2 App. 1-49
WSW63 Function setting 26 App. 1-50
WSW64 Setting the language/Default paper size App. 1-51
WSW65 Setting the paper support App. 1-51
WSW No. Function Refer to: