4-30
Confidential
(11) General communications-related
* Establishment of FAX communication
FAX communication is established when the calling station receives a DIS (reception capability) signal from the
called station and the called station receives an NSS or DCS (communications test) signal from the calling station.
(12)Maintenance mode
(13) Equipment error
Code 1 Code 2 Causes
B0 02 Unable to receive the next-page data.
B0 03 Unable to receive polling even during turn-around transmission
due to call reservation.
B0 04 PC interface error.
BF 01
Communication canceled by pressing the STOP key before
establishment of FAX communication*.
BF 02
Communication canceled by pressing the STOP key after
establishment of FAX communication*.
BF 03
Transmission canceled due to a scanning error caused by no
document or document feed problem in ADF scanning in real
time transmission.
Code 1 Code 2 Causes
E0 01 Failed to detect 1300 Hz signal in burn-in operation.
E0 02 Failed to detect PB signals in burn-in operation.
Code 1 Code 2 Causes
FF X
X Equipment error. (For X X, refer to Section 4.1.1 [ 2 ].)
To Next Page
Loading...
