4-47
Confidential
[ 3 ] Head/carriage unit drive and purge mechanisms
Defective component Result Error codes
Head/carriage unit - Any of the following images may appear on the printout: ---
Carriage motor - The head/carriage unit will not be able to travel
normally.
- When the power is turned on, the "Init Unable 3*"
appears on the LCD.
- The following image may appear on the printout:
30, 31, 32, 33
CR encoder strip - The head/carriage unit will not be able to travel
normally.
- Any of the following images may appear on the printout:
30, 31, 32, 33
Ink cartridge PCB - The "Cannot Print" message will appear even though
there is ink.
- Even though the ink has run out, the "Cannot Print"
message will not appear.
26, 27, 28, 29
Paper width sensor
(Media sensor)
- A paper jam will occur. 80, 82
- Print on the platen without paper. ---
To Next Page
Loading...
