Brother MFC5490CN - 4 ] Correct the Positioning Error of the Head;Carriage Unit

7-11
Confidential
[ 4 ] Correct the positioning error of the head/carriage unit
Before starting the operation below, be sure to set A4-size paper in the paper tray for printing
check patterns.
(1) Run "filedg32.exe" in the folder created.
The Filedrgs window appears as shown below.
(2) Drag and drop the "incline.prn" icon onto the Brother Maintenance USB Printer driver icon
in the Filedrgs window shown above.
The machine displays the "RECEIVING DATA" on the LCD and prints out the "Incline
Adjust" test pattern shown on the next page.
(3) Out of the three rows of the "Incline Adjust" test pattern (on the next page), check the
middle row and select the block that is the least uneven print. Make a note of that block
number.