Brother MFC5490CN - Motor Plate and CR Guide Rail (Bottom Edges); Switching Lever Guide

6-87
Confidential
 Motor plate and CR guide rail (bottom edges)
Apply a 1 mm diameter ball of grease (Permalub BAN-5) to the lubrication points below.
 Switching lever guide
Apply a 3 mm diameter ball of grease (Permalub BAN-5) to the lubrication point below.
(6_86)
CR support chassis
Motor plate
CR guide rail
(Right)
34+1
19+1
42+1
8+1
0.5 to 1.00.5 to 1.0
Viewed from the bottom
(mm)
Apply grease here.
(6_89)
Apply grease here.
Switching lever guide