Brother MFC5490CN - 10 ] Update the Paper Feeding Correction Value (Function Code 58); 11 ] Align Vertical Print Lines (Function Code 65); 12 ] Adjust Margins in Borderless Printing (Function Code 66); 13 ] Print out an ADF Copy Chart and Make a Copy of that Chart in ADF Scanning

7-31
Confidential
(5) Press the Stop/Exit key to return to the initial stage of the maintenance mode.
(6) Press the 9 key twice to exit from the maintenance mode.
[ 10 ] Update the paper feeding correction value (Function code 58)
Refer to Section 7.2, [ 5 ].
[ 11 ] Align vertical print lines (Function code 65)
Refer to Section 7.2, [ 6 ].
[ 12 ] Adjust margins in borderless printing (Function code 66)
Refer to Section 7.2, [ 7 ].
[ 13 ] Print out an ADF copy chart and make a copy of that chart in ADF scanning
Refer to Section 7.4, [ 2 ].
[ 14 ] Check LCD operation (Function code 12)
Refer to Chapter 9, Section 9.4.6.
[ 15 ] Switch back to standby
Refer to Section 7.2, [ 9 ].