Brother MFC5490CN - Upper ADF Chute

6-17
Confidential
Upper ADF chute
(9) Remove the four screws from the upper ADF chute.
(10)Release the latch "a" on the left rear of the document cover (c), insert the tip of a flat
screwdriver from the two square holes provided on the bottom of the document cover to
release the latches "b" (d) and "c" (e) and lift the upper ADF chute up and off the
document cover.
Taptite, cup B
M3x10
Document cover
Latch "b"
Latch "a"
Upper ADF chute
(6_15)
(Left)
Latch "c"
1
2
3
Square hole
Square hole