Brother MFC5490CN - Switching between DTMF and FSK for Caller ID; Transmission of Caller ID Wetting Pulse; Wsw55; Wsw56

App. 4-58
Confidential
• Selector 7: Transmission of caller ID wetting pulse
If the machine fails to display a caller ID due to a wetting pulse transmitted after the
detection of a tone alert, disable the transmission of caller ID wetting pulse.
• Selector 8: Switching between DTMF and FSK for caller ID
If the machine fails to receive a caller ID, switch from DTMF to FSK. This setting is
equivalent to the DTMF/FSK setting made from the menu.
WSW55 (Function setting 20) (Not used.)
WSW56 (Function setting 21) (Not used.)
Note: Selector 4 is applicable to wireless LAN-enabled models.
• Selector 4: Wireless LAN functions
To disable the wireless LAN (WLAN) functions, set this selector to "1" and turn the
machine power off and then on.
Selector
No.
Function Setting and Specifications
1
|
8
---
Selector
No.
Function Setting and Specifications
1 PS emulation 0: Disable 1: Enable
2 Not used.
3
Reprinting
0: Disable 1: Enable
4
Wireless LAN functions
0: Enable (default) 1: Disable
5
|
8
Not used.