8-1
Confidential
8.1 CLEANING THE EXTERNAL AND INTERNAL SURFACE OF THE
MACHINE
(1) If the external surface of the machine is stained, clean it with a soft, clean and lint-free
cloth.
Note: Do not use isopropyl alcohol (IPA) to remove dirt or stains from the molding parts.
Doing so may cause cracks in those parts.
(2) If the inside of the machine is stained
, first unplug the power cord from the electrical outlet
and then clean it with a soft, clean and lint-free cloth.
Note: Do not use liquid or aerosol cleaners.
(3) If the PF encoder disk or CR encoder strip is stained
, replace it with a new one. Do not try
to clean it.
To Next Page
Loading...
