Brother MFC5490CN - Extension of the Waiting Time between Ansam and DIS; Transmission of USB Serial Number to PC; Wsw59

App. 4-62
Confidential
WSW59 (Function setting 24)
Note: Selector 2 takes effect only when the V.34 mode is permitted (WSW19, selector 7) in
models supporting V.34 mode.
• Selector 1: Transmission of USB serial number to PC
By default, the machine transmits the USB serial number to the connected PC.
If Windows Vista is running on the PC, the transmission of the USB serial number to the
PC might cause a problem. If it happens, disable the transmission with this selector.
• Selector 2: Extension of the waiting time between ANSam and DIS
Setting this selector to "0" extends the waiting time between the ANSam and DIS in order
to secure the time required for switching the calling machine’s echo suppressor in
transmission from a G3 to G4 FAX machine.
Selector
No.
Function Setting and Specifications
1
Transmission of USB serial
number to PC
0: Enable 1: Disable
(default)
2
Extension of the waiting time
between ANSam and DIS
0: Enable 1: Disable
(default)
3
|
7
Checking of the specified
character code set when displaying
or printing the folder/file names
stored in memory cards or USB
flash memory drives
No.34567
00000: ASCII
(default for U.S.A/
European models)
00001: Latin1 (CP1252)
00010: Latin2 (CP1250)
00011: Cyrillic (CP1251)
00100: SJIS (CP932)
(default for Japanese
models)
00101: Thai (CP874)
00110: Korean (CP949)
00111: Traditional Chinese
(CP950)
01000: Simplified Chinese
(CP936)
(default for Chinese
and Asia & Pacific
models)
01001: Arabic (CP1256)
01010
| Reserved.
11111
8
Improvement of DTMF detection
function (to minimize the effects
of momentary power failure or
noise)
0: Disable 1: Enable
(default)