6-2
Confidential
Tightening Torque
*1
For 200 V series only
*2
ASF motor: Auto Sheet Feeder motor
Location of screw Screw type Q'ty
Tightening torque
Nm (kgfcm)
Grounding wire
(for ADF drive unit and CIS motor)
Taptite, cup S M3x6 1 0.40±0.1 (4±1)
ADF & document cover ASSY Taptite, bind B M4x12 1 0.80±0.1 (8±1)
Hinge arm L Taptite, bind B M4x12 3 0.80±0.1 (8±1)
Upper ADF chute Taptite, cup B M3x10 4 0.60±0.1 (6±1)
Lower ADF chute Taptite, cup B M3x10 2 0.60±0.1 (6±1)
Grounding wire (for ADF drive unit) Taptite, cup S M3x6 1 0.80±0.1 (8±1)
ADF drive unit Taptite, cup B M3x10 2 0.60±0.1 (6±1)
ADF motor Screw, pan (s/p washer) M3x6 1 0.60±0.1 (6±1)
Control panel ASSY Taptite, cup B M3x10 3 0.40±0.1 (4±1)
Edge covers (L and R) Taptite, bind B M4x12 4 0.70±0.1 (7±1)
Side covers (L and R) Taptite, bind B M4x12 2 0.70±0.1 (7±1)
Upper cover Taptite, bind B M4x12 5 0.70±0.1 (7±1)
Rear under cover Taptite, cup B M3x10 2 0.40±0.1 (4±1)
Main PCB shield Taptite, cup S M3x6 2 0.40±0.1 (4±1)
Taptite, cup B M3x10 1 0.40±0.1 (4±1)
Main PCB Taptite, cup B M3x10 4 0.40±0.1 (4±1)
Main PCB shield frame Screw, pan (s/p washer) M3x8 1 0.40±0.1 (4±1)
(Together with MJ/PS shield unit)
MJ/PS shield unit
(Together with engine unit)
Screw, pan (s/p washer) M3x8 1 0.40±0.1 (4±1)
Taptite, cup S M3x6 1 0.40±0.1 (4±1)
Power supply PCB Taptite, cup S M3x8 3 0.40±0.1 (4±1)
MJ shield Screw, pan (s/p washer) M3x8 1 0.40±0.1 (4±1)
MJ PCB
Taptite, cup S M3x6 1 0.40±0.1 (4±1)
Grounding wire (for power cord)
*1
Screw, pan (washer) M4x8DB 1 0.60±0.1 (6±1)
Chassis support Taptite, cup B M3x12 1 0.60±0.1 (6±1)
Engine unit Taptite, cup B M3x12 1 0.60±0.1 (6±1)
Maintenance unit Taptite, cup B M3x10 3 0.60±0.1 (6±1)
ASF motor
*2
Screw, pan (s/p washer) M3x5 2 0.70±0.1 (7±1)
Carriage motor Screw, bind M3x6 2 0.60±0.1 (6±1)
PF encoder PCB Screw, bind M2x12 1 0.15±0.05 (1.5±0.5)
To Next Page
Loading...
