Brother MFC5490CN - Edge Covers, Side Covers, Speaker, Upper Cover, Encoder Guard Film, and Rear under Cover

6-29
Confidential
6.1.7 Edge Covers, Side Covers, Speaker, Upper Cover, Encoder Guard Film,
and Rear Under Cover
NOTE: Make sure that the jam clear cover has been removed.
(1) At the left end of the machine, remove the two screws from the edge cover L. Then release
the latch that holds the rear end of the edge cover L and lift the cover up.
(2) At the right end of the machine, remove the two screws from the edge cover R and lift it up.
(3) Remove the screw from each of the side covers L and R and lift those covers up.
Edge cover R
Latch
Taptite, bind B
M4x12
Edge cover L
Upper cover
Side cover L
(6_17_BHL9_A4)
Latch
Viewed from the rear
Taptite, bind B
M4x12
Side cover L
Tab
Side cover R
Upper cover
Hooks
(6_18_BHL9_A4)