6-20
Confidential
ADF drive unit and ADF motor
(18)Remove the two screws from the ADF drive unit and take it off the lower ADF chute.
(19)Disconnect the ADF motor harness from the motor.
(20)Release the ADF motor from the drive unit by removing the screw.
Lower ADF chute
Grounding wire
Taptite, cup B
M3x10
ADF drive unit
(6_19)
(Rear)
ADF motor
ADF moto
Screw,
an (s/p washer)
M3x6
Planetary arm
Hook
Planetary gear
ADF drive unit
ADF motor harness
(6_20)
When mounting the lower ADF chute on
the document cover, turn the planetary arm
clockwise (viewed from the rear) to put
the planetary gear in the upper position.
To Next Page
Loading...
