Other Functions
30
4
c Click the [Advanced] tab, select the [Distributed Printing] check box, and then click [Settings].
d In the [Distributed Printing Settings] dialog box, select the printers you want to use for distributed
printing.
1Click [Detect Current Paper Information…].
2 The current printer information that was detected appears below [Current Width] and [Paper Type].
3 Select the check box next to the [Printer Name] you want.
If the selected tape width is different from that displayed beside [Current Width], appears beside the
setting below [Current Width]. Load the printer with tape of the width specified [Set Width].
3
1
2
To Next Page
Loading...
