Brother PT-E800T - Page 87

Troubleshooting
80
14
(2 times in 1.8
seconds)
Adapter error
In boot mode
Reset mode
(when the mode is starting)
Reset mode
(when the button is pressed 2/6 times)
(Three times) (Three times)
Reset mode
(when reset is confirmed)
Printing mode (Tube)
(1 time in 1
second)
Receiving data (Tube)
(2 times in 1.8
seconds)
In cutting mode (Tube)
(2 times in 1.8
seconds)
(2 times in 1.8
seconds)
Memory full error (Tube)
Cutter error (Tube)
i Turn the P-touch off and on again.
(2 times in 1.8
seconds)
No tube error (Tube)
Media end error (Tube)
(1 time in 1
second)
Top cover open error when printing (Tube)
(1 time in 1
second)
Ink ribbon jam error (Tube)
No remaining ink ribbon error (Tube)
Tube jam error (Tube)
Tube feeding problem (Tube)
i Check the ribbon cassette and tube.
Tube, Label, Power indicator
(Tube)
(Label)
(Power)
Condition