Brother PT-E800T - Page 88

Troubleshooting
81
14
No ribbon cassette error (Tube)
(2 times in 1.8
seconds)
(2 times in 1.8
seconds)
High resolution/high speed printing error (Tube)
Printing mode (Label)
(1 time in 1
second)
Receiving data (Label)
(2 times in 1.8
seconds)
(2 times in 1.8
seconds)
Memory full error (Label)
Communication error (Tube/Label)
When blinking alternately: Cutter error (Label)
i Turn the P-touch off and on again.
When blinking simultaneously:
High temperature error (Label)
(2 times in 1.8
seconds)
Non-compliant tape error (Label)
(1 time in 1
second)
Wrong media error (Label)
i Check that the correct tape cassette is inserted.
(2 times in 1.8
seconds)
No cassette error (Label)
Media end error (Label)
Top cover open error when printing (Label)
(2 times in 1.8
seconds)
(2 times in 1.8
seconds)
High resolution/high speed printing error (Label)
i Confirm the conditions of use.
Black mark not detected error (Label)
Tube, Label, Power indicator
(Tube)
(Label)
(Power)
Condition