9
BRAVO Analyzer - User Manual
Safety 1
1.4.3 Laser exit points
The location of the laser exit point depends on the type of installed measuring tip. Only
as long as a spectroscopic measurement is in progress, invisible laser radiation of laser
class 1M exits the handheld Raman spectrometer at the following exit points:
In case of an installed measuring tip
for bags, directed laser radiation
exits BRAVO.
In case of an installed measuring tip
for vials, diffusely scattered laser
radiation exits BRAVO.
Important note: If there is not any
measuring tip installed, the user can-
not start a measurement neither by
pressing the Start Measurement but-
ton at the BRAVO spectrometer
nor by touching the Collect Data icon
on the touch screen. This safety
feature prevents an accidental laser
emission in case no measuring tip is
installed.
To Next Page
Loading...
General