EasyManua.ls Logo

Bruker bravo - Specification; BRAVO; Environmental conditions

Bruker bravo
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61
Bruker Optik GmbH BRAVO Analyzer - User Manual
A Specification
A.1 BRAVO
A.2 Environmental conditions
BRAVO is intended for indoor usage only, namely in laboratory and warehouse environ-
ments.
Parameter Specified Parameter Value
Dimensions 27.0 cm (w) x 15.6 cm (d) x 6.2 cm (h)
Weight ca. 1.5 kg (3.25 lbs)
Voltage 100 to 240 VAC, 50/60 Hz (for battery charger of the dock-
ing station)
Spectral range
3.200 to 250 cm
-1
Spectral
resolution
10 cm
-1
to 12 cm
-1
Laser class
The BRAVO analyzer is classified as a laser class 1M
product according to IEC/EN 60825-1:2007.
Laser
P
opt
< 100mW @
λ
= 700 - 1100nm
Note: The two integrated laser diodes are classified as
laser class 3B lasers.
Detector
CCD
Touchscreen display
High resolution touchscreen (15.0 cm x 9.4 cm),
7" back-lit IPS HD display
Resolution: 1280 x 800 (219ppi)
Viewing angle: 178 °
Parameter Specified Parameter Value
Operating site BRAVO is intended for indoor usage only, namely in labo-
ratory and warehouse environments.
2000 above sea level
Ambient temperature
range
5°C to 35°C (41°F to 95 °F)
Atmospheric humidity
(non condensing)
0 to 95% (relative humidity)
Ingress protection IP 64
Draft version

Table of Contents