Bruker bravo - Connecting BRAVO to the WLAN

39
BRAVO Analyzer - User Manual
Operation 4
4.9.2 Connecting BRAVO to the WLAN
Opening the Settings workflow
1. Open the Settings workflow by swip-
ing left or right in the navigation bar
until the icon is in the center.
2. Touch the icon .
Opening the Network screen
3. Swipe left or right in the navigation
bar until the icon is in the center.
Selecting the network type Wireless
4. Touch the Wireless Network icon
.
Performing a WiFi scan to find out
which WLANs are available at your
site.
5. Touch the WiFi Scan icon .
➣ Wait until the WiFi scan is finished.
Afterwards, all WLANs which are
currently available at your site are
displayed.
Draft version