19
Bruker Optik GmbH BRAVO Analyzer - User Manual
General information 2
2.4 Inspecting the packaging
After having received the BRAVO analyzer, inspect the packaging for damages.
2.5 Ambient conditions and power supply
For proper and error-free operation of the instrument, ensure that the following condi-
tions are met:
CAUTION
Possible damage to the delivered goods because of transport damage
Non-observance of the following safety instructions could result in injury.
➣ Check the packaging visually or damages. If there are signs of damage contact
the shipping company.
➣ A BRAVO analyzer delivered in a damaged packaging may be damaged as well.
Therefore, do not put BRAVO into operation in this case. Contact Bruker instead.
(See section 1.10.)
Ambient conditions /
environmental require-
ments:
• Approved for indoor use only (in laboratory and
warehouse)
• Ambient temperature range: 5°C - 35°C (41°F to
95°F)
• Humidity (non-condensing):
0-95% (relative
humidity)
• BRAVO is shielded against electromagnetic interfer-
ences. Nevertheless, the instrument should not be
installed near high electric and/or magnetic fields.
Power supply: BRAVO is designed for both battery operation (stan-
dard) and mains operation (option).
Note: For mains operation, put BRAVO in the docking
station. The docking station is an optional item. In this
case, the power supply has to fullfil the following
requirements: 100 - 240 VAC
± 10%, 50/60 Hz
☞ For information about battery specifications, see
appendix A.3.
☞ For information about how to recharge a battery,
see section 4.8.