51
Bruker Optik GmbH BRAVO Analyzer - User Manual
5 Cleaning and Decontamination
5.1 Cleaning the BRAVO analyzer
5.1.1 Cleaning the plastic cover
Wipe the plastic housing clean with a dry or damp cloth. Damp the cloth with water, if
required.
5.1.2 Cleaning the touchscreen
Cleaning utensils
• a soft and lint-free cloth
• ethanol
➣ Do not use any organic solvent or detergent other than ethanol.
i
For cleaning the touchscreen, we recommend using a microfiber cloth.
Cleaning procedure
Wipe off the touchscreen gently with a soft cloth moistened with ethanol. Do not rub and
do not press too hard on the screen.
i
We recommend switching off the BRAVO analyzer before beginning to clean the touch-
screen. Usually it is much easier to see where the fingerprints and other smudges are
when the BRAVO analyzer is switched off.
NOTICE
BRAVO analyzer damage because of improper cleaning
➣ Do not immerse the BRAVO analyzer in water or any other liquid cleaning agent.
➣ Do not wash down the BRAVO analyzer.
NOTICE
BRAVO analyzer damage because of improper touchscreen cleaning
➣
Do not clean the touchscreen with something that is abrasive. Otherwise, there is
the risk of scratching the touchscreen.
➣
Do not spray or pour ethanol directly onto the touchscreen. There is a risk of liquid
leaking into the BRAVO analyzer and damaging it. Instead, moistened the cloth
with ethanol and wipe the touchscreen with the damp cloth.
To Next Page
Loading...