Mast/Lift system 7000
Main mast 1.6-2.5 t (7100)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 15 – 13
5. Dock the mast and turn the eccentric cams (e) through 90 degrees
so that their largest level surfaces (f) attain the vertical and face
outwards (towards the forks). Observe any previous marking made
on the eccentric cam.
6. Screw the locking rings (d) in place with the screws (c) and their
washers, so that the eccentric cams cannot turn.
7. If necessary, the mast and reach carriage are centred using the ad-
justing screws (h) by alternately moving the adjusting screw on one
side and loosening on the other. Refit the locking screw (b).
e
c
d
eh
To Next Page
Loading...
