Mast/Lift system 7000
Main mast 1.6-2.5 t (7100)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 15 – 15
14. Tighten the screws (c) on the locking ring (d) to 124Nm.
15. Tighten the screws (a) of the bottom bracket to
1.6–2.0 ton mast: 519 Nm (one screw)
2.5 ton mast: 266 Nm (two screws)
16. Unscrew the locking screw (b) and apply Loctite 29320 (Loctite 242
Blue) to the threads.
17. Screw in the locking screw (b) until it makes contact.
18. Finally, tighten the locking screw (b) ¾ of a turn.
19. Connect the hydraulic hoses to the lift cylinders (H1 and H2) and
the free lift cylinder (H3) on the main valve.
20. Connect the hydraulic hoses to the tilt cylinder (A1 and B2).
21. Connect any electric cables for extra functions on the mast.
22. Bleed the hydraulic system - see the section "Hydraulic system,
bleeding".
b
c
d
To Next Page
Loading...
