2-76 2002 Buell X1: Chassis
HOME
AIR SCOOP 2.36
REMOVAL
1. See
Figure 2-124. Remove screw and washer (1) from
wellnut (3) at front of air scoop (2).
2. Remove screw and washer (5) from wellnut at bottom of
air scoop.
3. See
Figure 2-125. Remove screw, washer and nut hold-
ing air scoop (1) to clamp (3).
4. Remove air scoop.
INSTALLATION
1. See
Figure 2-124. Position air scoop (2) over fuel tank
cover (4).
2. Fasten air scoop (2) to fuel tank cover (4) using screw
and washer (1) and wellnut (3) at front of scoop.
3. Install screw and washer into wellnut at bottom of scoop.
4. See
Figure 2-125. Install screw, washer, and nut to
attach air scoop (1) to clamp (3).
Figure 2-124. Air Scoop
Figure 2-125. Air Scoop Clamp
b0775x2x
1. Screw and Washer
2. Air Scoop
3. Wellnut (2)
4. Fuel Tank Cover
5. Screw and Washer
1
2
3
4
5
1. Air Scoop
2. Nut
3. Clamp
4. Screw and Washer
6978
2
3
4
1
To Next Page