Buell X1 2002 - Windscreen

2002 Buell X1: Chassis 2-81
HOME
WINDSCREEN 2.39
REMOVAL
1. See
Figure 2-134. Remove two screws and nylon wash-
ers on each side.
2. If necessary, remove both windscreen brackets following
procedure under 2.16 FRONT FORK.
INSTALLATION
1. If removed, install both windscreen brackets. See
2.16
FRONT FORK.
2. Align windscreen on right and left brackets.
3. See
Figure 2-134. Install two screws and nylon washers
on each side. Tighten securely.
Figure 2-134. Windscreen, Right Side
7060
Screws and
Nylon Washers