Buell X1 2002 - Specifications

2002 Buell X1: Fuel System 4-1
HOME
SPECIFICATIONS 4.1
TORQUE VALUES
FUEL TANK CAPACITY GALLONS LITERS
To t a l (including reserve) 4.2 15.89
Reserve/Low Fuel Indicator at 0.4 1.51
IDLE SPEED ADJUSTMENT
Normal Idle Speed 850-1050 RPM
ITEM TORQUE NOTES
Air Cleaner Backplate Screws 3-5 ft-lbs 4-7 Nm page 4-113
Air Cleaner Cover Screws 27-29 in-lbs 3.1-3.3 Nm page 4-113
Bank Angle Sensor Mounting
Screw
25-27 in-lbs 2.8-3.1 Nm page 4-98
Battery Terminal Hardware 60-96 in-lbs 7-11 Nm page 4-105
Breather Bolts 10-15 ft-lbs 14-20 Nm HYLOMAR, page 4-113
Canister Mounting Clamp Screws 6-8 ft-lbs 8-11 Nm page 4-117
Coil Mounting Screws 4-6 ft-lbs 5-8 Nm page 4-95
Engine Temperature Sensor 10-14 ft-lbs 14-19 Nm page 4-97
Fuel Cap Flange Screws 16-18 in-lbs 1.8-2.0 Nm special pattern to tighten, page 4-102
Fuel Filter Bracket Bolt 30-33 ft-lbs 41-45 Nm page 4-106
Fuel Pressure Regulator Screws 15-20 in-lbs 1.7-2.3 Nm page 4-108
Fuel Pump Mounting Nuts
68-75 in-lbs 8-9 Nm
LOCTITE THREADLOCKER 243 (blue), special
tightening procedure, page 4-108
Fuel Tank Mounting Screws 9-11 ft-lbs 12-15 Nm page 4-103
Fuel Tank Vent Valve Fitting 40-60 in-lbs 5-7 Nm special tightening procedure, page 4-105
Ignition Rotor Mounting Bolt 43-53 in-lbs 5-6 Nm LOCTITE THREADLOCKER 243 (blue), page 4-93
Inner Timer Cover Screws 12-20 in-lbs 1-2 Nm page 4-93
Intake Flange Screws 6-10 ft-lbs 8-14 Nm page 4-112
Low Fuel Level Sensor Screw 16-20 in-lbs 1.8-2.3 Nm page 4-108
Oxygen Sensor 42-45 ft-lbs 57-61 Nm LOCTITE ANTI-SEIZE, page 4-96
Snorkel Plate Screws
6-8 ft-lbs 8-11 Nm
LOCTITE THREADLOCKER 243 (blue), page 4-
113
Timer Plate Studs 15-30 in-lbs 2-3 Nm page 4-93