1-4 2002 Buell X1: Maintenance
HOME
Ratchets and Handles
● Periodically clean and lubricate ratchet mechanisms with
a light grade oil. Do not replace parts individually; ratch-
ets should be rebuilt with the entire contents of service
kit.
● Never hammer or put a pipe extension on a ratchet or
handle for added leverage.
● Always support the ratchet head when using socket
extensions, but do not put your hand on the head or you
may interfere with the action of its reversing mechanism.
● When breaking loose a fastener, apply a small amount of
pressure as a test to be sure the ratchet’s gear wheel is
engaged with the pawl.
Sockets
● Never use hand sockets on power or impact wrenches.
● Select the right size socket for the job.
● Never cock any wrench or socket.
● Select only impact sockets for use with air or electric
impact wrenches.
● Replace sockets showing cracks or wear.
● Keep sockets clean.
●
Always use approved eye protection when using power
or impact sockets.
Storage Units
● Don’t open more than one loaded drawer at a time.
Close each drawer before opening up another.
● Close lids and lock drawers and doors before moving
storage units.
● Don’t pull on a tool cabinet; push it in front of you.
● Set the brakes on the locking casters after the cabinet
has been rolled to your work.
To Next Page
Loading...
