EasyManua.ls Logo

Buell X1 2002 - Tires and Wheels; Tire Inflation; Wheel Bearings

Buell X1 2002
462 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2002 Buell X1: Maintenance 1-21
HOME
TIRES AND WHEELS 1.9
TIRE INFLATION
11WARNING1WARNING
Do not inflate any tire beyond its maximum inflation
pressure as specified on tire sidewall. Overinflation may
cause tire to suddenly deflate which could result in death
or serious injury.
Check tire pressure and tread:
Before every ride.
At the 500 mile (800 km) service interval.
At every scheduled service interval.
Check for proper front and rear tire pressures when tires are
cold. Compare pressure against
Tabl e 1-5.
WHEEL BEARINGS
11WARNING1WARNING
Never use compressed air to “spin-dry” bearings. Very
high bearing speeds can damage unlubricated bearings.
Spinning bearings with compressed air can also cause a
bearing to fly apart, which could result in death or seri-
ous injury.
Check wheel bearings:
Every time the wheel is removed.
At every 10,000 mile (16,000 km) service interval.
When storing or removing the motorcycle for the season.
Check wheel bearings and axle spacers for wear and corro-
sion. Excessive play or roughness indicates worn bearings.
Replace bearings in sets only.
Table 1-5. Tir e Pressures
TIRE
PRESSURE FOR
SOLO RIDING
PRESSURE AT
GVWR
Front 32 PSI 220 kPa 36 PSI 248 kPa
Rear 36 PSI 248 kPa 38 PSI 262 kPa

Table of Contents

Related product manuals