Buell X1 2002 - Page 262

4-44 2002 Buell X1: Fuel System
HOME
Test 4.16 (Part 2 of 2)
Continued from Test 4.16 (Part 1 of 2).
Disconnect negative battery cable. Measure
resistance between battery positive and coil
connector [83] Terminal B (W/BK).
Wiggle harness. Is resistance continuously
less than 1.0 ohm?
YES
Replace cam sensor
with a unit known
to be good. Does
problem still exist?
NO
Find source
of intermittent
and repair.
YES
Install original cam
sensor. Replace ECM.
See
4.29 ELECTRONIC
CONTROL MODULE.
NO
OK.
5
6
7540
7541
7542