Burkert 8691 - 2 INTENDED USE

9
Intended use
2 INTENDED USE
ThecontrolheadType8691Version2isdesignedtobemountedonpneumaticactuatorsofprocess
valvesforthecontrolofmedia.Thepermitteduidmediaarelistedinthetechnicaldata.
▶ Use the device for its intended purpose only. Non-intended use of the device may be dangerous to
people, nearby equipment and the environment.
▶ Correct transportation, correct storage as well as correct installation, commissioning, operation and
maintenance are essential for reliable and problem-free operation.
▶ When using the device, observe the permitted data, operating conditions and application conditions.
This information can be found in the contractual documents, the operating instructions and on the type
label.
▶ Use the device only in conjunction with third-party devices and components recommended and autho-
rized by Bürkert.
▶ Do not use the device outdoors without protection from the weather.
▶ In areas at risk of explosion, only use devices approved for use in those areas. These devices are
labeled with a separate Ex type label. For such use, note the information provided on the separate Ex
type label and the additional explosion-related information or separate explosion-related operating
instructions.
english
Type 8691, Rev. 2