BVL V-MIX Fix Plus - Counter Blades

Design and function
V-MIX Fix Plus
Translation of the Original Operating Manual
45
4.10 Counter blades
The use of counter blades (1) allows for a finer reduction
and swifter mixing of the fodder components filled into
the mixing hopper.
The counter blades:
 are used, for instance, for the reduction and mixing
of round or square bales,
 can be swung into different positions inside the
mixing hopper,
 work with greater efficiency the farther they pro-
trude into the mixing hopper.
Fig. 4-18
Manual counter blades (4) are swung in or out using a
handle (2) and fixed in place at one of the three possible
positions by inserting the bolt (3) into the corresponding
hole.
Fig. 4-19
Hydraulic counter blades (5) are swung in or out hydrau-
lically.
Fig. 4-20
1
2
3
4
5