BVL V-MIX Fix Plus - Block Ball Valve; Motor and Main Drive Shaft Protective Plates; Emergency Stop Button

Transport, setup, and initial commissioning
56
Translation of the Original Operating Manual
V-MIX Fix Plus
4.16.2 Block ball valve
The block ball valve (1) secures the dosing gate from
inadvertent lowering during the performance of mainte-
nance work.
Fig. 4-34
4.16.3 Motor and main drive shaft protective plates
The drive motor is fitted with protective plates in the area
of the main drive shaft (1) which prevent anyone from
reaching into the drive motor.
Fig. 4-35
4.16.4 Emergency stop button
Located on the control switch cabinet is an emergency
stop button (1). A press on the emergency stop but-
ton (1) stops all movements at the machine.
Fig. 4-36
The emergency stop button is not intended to stop the machine during normal operation.
1
1
1