BVL V-MIX Fix Plus - Purpose of Operating Manual; Storing the Operating Manual; Locational Information in Manual

Contents
V-MIX Fix Plus
Translation of the Original Operating Manual
7
7.7 Cutting blades of the mixing auger 83
7.7.1 Sharpening cutting blades 83
7.7.2 Swiveling/replacing cutting blades 84
7.8 Hydraulic system 85
7.8.1 Checking the hydraulic oil level 86
7.8.2 Refilling hydraulic oil 86
7.8.3 Markings on hydraulic hose lines 87
7.8.4 Maintenance intervals 87
7.8.5 Inspection points for hydraulic hose lines 87
7.8.6 Installing and removing hydraulic hose lines 88
7.9 Conveyor belt (optional) 89
7.9.1 Belt connection 89
7.9.2 Tensioning/aligning the conveyor belt 89
7.10 Tightening torques for bolt joints 90
8 Faults 91
9 Appendix 92
9.1 Supplied third-party documents 92
9.2 Circuit diagrams 92
1 User information
The chapter User information provides you with information on how to use this operating manual.
1.1 Purpose of this operating manual
This operating manual:
 describes how to operate, clean, service and repair the machine,
 provides important information on how to handle the machine in a safe and efficient way.
If you have any questions, please do not hesitate to contact us.
1.2 Storing the operating manual
The operating manual is part of the machine. Therefore, store this operating manual:
 at the machine at all times,
 for future reference.
If selling the machine, pass this operating manual on to the purchaser.
1.3 Locational information in this operating manual
4
3