Check each day to see if the machine is dirty.
Thoroughly clean the machine when dirty. Dirt attracts moisture and leads to rust for-
mation.
Do not use high pressure sprayers to clean the machine.
Focus particularly on the fans and subject them to thorough cleaning (switch cabinet
ventilation, engine cooling). These fans must not be covered and need to be cleaned
from any dirt on a regular basis.
Grease the entire machine when finished cleaning.
Observe all legal regulations on handling and disposing of cleaning agents.
Touch up any paint damage.
Lubricate all bearing and lubrication points as specified in the lubrication chart.
Remove all dirt from the lubrication nipples.
Use environmentally safe and biodegradable oils and greases if lubricants might en-
ter feedstuffs or the soil. Contact your authorized farm equipment dealer for more in-
formation.
To Next Page
Loading...
