C-Data FD1216S User Manual

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
94

18.6ontautofind
【Command】
ontautofindport‐idswitch
【View】 eponview
【Parameter】
port‐id： ThePONportnumberthatneedtoopenthefunctionofONTautomaticallyfind
switch
： the switch of ONT automatically find ,value : enable，disable
【Description】
This command is used to open or close automatic found ONT under the PON port of EPON OLT 
【Example】
Open the function of automatic found ONT under the PON port 1 
OLT(interface‐EPON)#ontautofind1enable

18.7ontactive
【Command】
ontactiveport‐id(all|ont‐id)
【View】 eponview
【Parameter】
port‐id：
The PON port number of the ONT needed to activate 
all：
Used to volume active ONT 
ont‐id
：  Usedtoactive specified ONT on the PON port 
【Description】
This command is used to activate the
unactivated ONT. ONT can work normally only in the
activatedstate.Bydefault,ONTisactivated.
【Example】
Activeont1onthePON1
OLT(interface‐EPON)#ontactivate11

Activateall of unactiveted ONT on the PON1 
OLT(interface‐EPON)#ontactivate1all
NumberofONTsthatcanbeactivated:1,success:1

18.8ontdeactive
【Command】
ontdeactiveport‐id(all|ont‐id)

C-Data FD1216S Specifications

General

Brand	C-Data
Model	FD1216S
Category	Switch
Language	English