Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
60
【Commond】
traffic‐dscp (inbound| outbound ) acl‐id[ rule‐idrule‐id ]port（ge | EPON | xge）port‐list
remark‐dscpremark‐dscp‐value
notraffic‐dscp(inbound|outbound)acl‐id[rule‐idrule‐id]port （ge|EPON|xge）port‐list
【View】
Configview
【parameter】
Inbound:thetrafficoninboundpacketsoftheinterface
Outbound： thetrafficonoutboundpacketsoftheinterface
rule‐id
：
theruleIDofACL
acl‐id: ACL’sname
port‐list
：
portslist
remark‐dscp‐value
：
ToremarktheDSCPvalue
【Describtion】
traffic‐dscp: Command is used to configure an ACL for the specified port of DSCP tags again, and
make it into effect. When you need to use the ACL rules of port of DSCP message tag, use this
command.
no traffic‐dscp: Command is used to cancel the designated port of the ACL. When you need to
delete the specified port of ACL to tag, use this command.
【Example】
Command is used to cancel the designated port of the ACL. When you need to delete the specified
port of ACL to tag, use this command.
OLT(config)#time‐rangeworktime8:00to18:00working‐day
OLT(config)#acl2000
OLT(acl‐basic‐2000)#rule2permitsource10.10.10.20.0.0.0time‐rangeworking‐day
OLT(acl‐basic‐2000)#exit
OLT(config)#raffic‐dscpinbound2000
portgeEPONxge1mark‐dscp43
12.3
traffic‐limit
【Commond】
traffic‐limit (inbound| outbound)acl‐id[rule‐idrule‐id ]port（ge| EPON | xge）port‐list cir
rate‐valuepirrate‐valueexceed(drop|reremark‐dscpremark‐dscp‐value)
notraffic‐limit(inbound|outbound)acl‐id[rule‐idrule‐id]
port （ge|EPON|xge）port‐list
【View】
Configview
【Parameter】
Inbound:thetrafficoninboundpacketsoftheinterface
Outbound： thetrafficonoutboundpacketsoftheinterface
rule‐id
：
IDtheruleIDofACL
acl‐id:ACL’sname
port‐list
：
portslist
To Next Page
Loading...
General