Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
63
Inbound:thetrafficoninboundpacketsoftheinterface
Outbound： thetrafficonoutboundpacketsoftheinterface
rule‐id： IDtheruleIDofACL
acl‐id:ACL’sname
port‐list： portslist
vlanID:Addtheouterlabel
pri‐value:Thevalueofthepriority
【Description】
traffic
‐priority: Command is used to configure vlan priority for the specified port, and make it
into effect. When you need to use the ACL rules to change VLAN priority, you can use this
command.
no traffic‐outervlan: Command is used to cancel ACL specified vlan priority of the specified
port. When you need to delete the specified port’s the vlan priority, you can use this command.
【Example】
In the worktime period, the message are specified that the priority of vlan is 1, ip address of the message
is 10.10.10.2
OLT(config)#time‐rangeworktime8:00to18:00working‐day
OLT(config)#acl2000
OLT(acl‐basic‐2000)#rule2permitsource10.10.10.20.0.0.0time‐rangeworking‐day
OLT(acl‐basic‐2000)#exit
OLT(config)# traffic-priority inbound 2000 port ge 1 remark-priority 2
12.7
traffic‐redirect
【Command】
traffic‐redirectinboundacl‐id[rule‐idrule‐id]port（ge|xge）port‐listto（ge|EPON|xge）
port‐list
notraffic‐redirectinboundacl‐id[rule‐idrule‐id]port （ge|xge）port‐list
【View】
Configview
【Parameter】
Inbound:the
trafficoninboundpacketsoftheinterface
Outbound：Thetrafficonoutboundpacketsoftheinterface
rule‐id： theruleIDofACL
acl‐id:ACL’sname
port‐list： portslist
【Description】
traffic‐redirect: Command is used to configuration ACL redirects for specify port, and make it
into effect. When you need to use the ACL rules to redirect traffic of port, you can use this
command.
no traffic-redirect: Command is used to cancel ACL traffic mirrorof the specified port. When
you need to delete the ACL traffic mirror function of the specified port,you can use this command.
【Example】
To Next Page
Loading...
General